AJA FS1 Konverter

Universal Frame Synchronizer/Converter.

SD/HD Audio/Video Frame Sync/Konverter – das Schweizer Taschenmesser für das Rack in Studio und Ü-Wagen.

• SD/HD up/down Konvertierung
• SD/SD Aspect Ratio Konvertierung
• HD/HD Cross Konvertierung (720p/1080i)
• 2 SDI, Composite, S-Video, Component HD/SD Ein- und Ausgänge
• 8 Kanäle AES, XLR analog und embedded SDI Audio Ein- und Ausgänge
• voll Steuerbar über Netzwerk / Web Interface
• Video/Audio Test Signal Generator, Video Proc Amp, TBC, 2 Netzteile

Flexible input, flexible output
Featuring a flexible input, output, and control architecture, the FS1 Universal HD/SD Audio/ Video Frame Synchronizer and Converter can simultaneously work with both HD and SD video all in full 10-bit broadcast quality video and 24-bit audio.

Supporting virtually any input or output, analog or digital, HD or SD, FS1 can up or down convert between SD and HD, and provide simultaneous HD and SD outputs. Up, down, cross conversion between HD formats are also supported, with simultaneous output of both formats.

AJA hardware conversion technology
AJA’s powerful hardware conversion technology ensures the highest image quality for your productions. Key conversion features include:

• SD/HD up/down-conversion
• SD/SD aspect ratio conversion
• HD/HD cross-conversion (720p/1080i)
• Up/down/cross-conversion with both the input and converted formats on SD/HD SDI outputs (both synchronized)
• HD cross-conversion with simultaneous down-converted SDI output

Digital and analog I/O flexibility
FS1 is loaded with comprehensive I/O that lets it handle the widest range of analog and digital signals – and convert between them.

Perfect for use in broadcast and post production environments, FS1 features Dual HD/SD-SDI inputs and outputs, comprehensive multi-channel audio connections and I/O for analog video equipment, including HD and SD component.

For audio, FS1 supports 8-channel AES, balanced analog, or 16-channel embedded audio with full flexibility and audio processing controls. You can choose from any of the 4 groups of embedded audio for 8-channel output on the AES or analog audio.

Remote configuration and control
FS units are network ready and support SNMP monitoring and web-based remote control. Units can be connected to any Ethernet network via the built-in 10/100/1000MB Ethernet port, allowing control and configuration of multiple FS units from any web browser on a connected computer. Configurations can be saved and applied to multiple units, ensuring consistency and quick configuration in large installs.

To integrate smoothly with the existing automation of a facility, FS1 can also receive external GPI commands to trigger a variety of functions, such as freezing an input source.

Closed caption conversion
FS1 supports closed captioning and the conversion of closed captioning between SD and HD formats – including full conversion of CEA-608 captions to the CEA-708 standard. FS1 can preserve closed captioning even when converting between formats, removing the need to re-insert closed captions after conversion.

Active Format Description
Automatically sets Active Format Description information to match the converted signal. This means AFD information does not have to be inserted after conversion and provides accurate information for devices that understand AFD.

Technische Spezifikationen

Video Formats	525i 29.97 625i 25 720P 50, 59.94, 60 1080i 25, 29.97, 30 1080PsF 23.98, 24 1080p 24, 25, 30 Notes: 1. In the case of 1080pSF/23.98 input – and when 1080i59.94 (or 525) is selected as an output format, the FS1 automatically does 3:2 pulldown to get the correct frame rate. 2. When passing 24 or 60 framerate video, output is high definition.
Video Input Digital	Dual SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits Single Link 4:2:2 (1 x BNC each)
Video Input Analog	HD component YPbPr, SMPTE-274 (3 x BNC) 12-bit A/D, 2x oversampling SD Component (3 x BNC) SMPTE/EBU N10, Betacam 525 line, Betacam 525J 12-bit A/D, 4x oversampling +/- .25 dB to 5.5 MHz Y Frequency Response +/- .25 dB to 2.5 MHz C Frequency Response .5% 2T pulse response <2 ns Y/C delay inequity SD Composite/YC (S-Video) 12-bit A/D, 4x oversampling
Video Output Digital (all simultaneously active)	Dual SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits Single Link 4:2:2 (1 x BNC each)
Video Output Analog (all simultaneously active)	HD component YPbPr/RGB, SMPTE-274 (3 x BNC) 12-bit D/A, 2x oversampling SD Component (3 x BNC) SMPTE/EBU N10, Betacam 525 line, Betacam 525J 12-bit D/A, 4x oversampling +/- .25 dB to 5.5 MHz Y Frequency Response +/- .25 dB to 2.5 MHz C Frequency Response .5% 2T pulse response <2 ns Y/C delay inequity SD Composite/YC (S-Video) 12-bit D/A, 4x oversampling
Audio Input Digital	16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (4 x BNC)
Audio Input Analog	8-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (8 x XLR via 25-pin breakout cable) +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital) +/- 0.2db 20 to 20kHz Frequency Response
Audio Output Digital	16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (4 x BNC)
Audio Output Analog	8-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (8 x XLR via 25-pin breakout cable) +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital) +/- 0.2db 20 to 20kHz Frequency Response
Up-Conversion	Hardware 10-bit Anamorphic: full-screen Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars Zoom Letterbox: results in image zoomed to fill full screen Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion	Hardware 10-bit Anamorphic: full-screen Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved Crop: image is cropped to fit new screen size
Cross-Conversion	Hardware 10-bit 1080i to 720P 720P to 1080i 720P to 1080PsF
SD to SD Aspect Ratio Conversion	Letterbox: This transforms SD anamorphic material to a letterboxed image. H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center V Crop: Will transform SD letterbox material to an anamorphic image.
Timecode	SDI RP188 via SDI BNC
Reference Input	Analog Color Black (1V) or Composite Sync (2 or 4V) Looping, non-terminating
Network Interface	10/100 Ethernet (RJ-45) Embedded web server for remote control VTECS™ protocol for Remote Control Panel
User Interface	Alphanumeric display, with dedicated buttons
Control	GPI in/out, 9-pin D-connector Pinout is as follows: 1 GPI IN 1 2 GPI IN 2- 3 GPI OUT 1 4 GPI OUT 2 5 Chassis Ground 6 I/O GROUND 1 7 I/O GROUND 2 8 I/O GROUND 1- 9 I/O GROUND 1 RS-422, Sony 9-pin protocol (reserved for future use) 9-pin D-connector pinout is as follows: 1 GND 2 RX- 3 TX+ 4 GND 5 No Connection 6 GND 7 RX+ 8 TX- 9 GND Shell GND
Physical	Width: 17.25″ (43.81cm) Depth: 12.5″ (31.75cm) Height: 1RU, 1.75″ (4.44cm) Weight: 6.5lb (2.94kg) Power: 100-240 VAC 50/60Hz (Dual, redundant power supplies), 25W typical; 30W max. 15A max. Environment: Operating temperature: 0 to 40 degrees C Relative humidity: 0 to 90%, non-condensing

Die Ware ist original verpackt und wird mit Rechnung und ausgewiesener Mehrwertsteuer versendet. Diese Hardware ist Umtausch- und Rückgaberecht ausgeschlossen. Dieses Angebot richtet sich ausschließlich an gewerbliche Käufer.