| HDR/WCG Processor with Colorfront EngineTM | - Processing Based on Human Perception Model
- Perceptually optimized color volume remapping
- Preserves the original creative intent
- Input Dynamic Range/Color Gamut
- SDR BT.709 100 Nits
- PQ BT.2020 1000 Nits
- PQ P3D65 1000 Nits
- Hybrid Log Gamma BT.2100
- Sony S-Gamut3/S-Log3
- ARRI Log C Wide Gamut
- Panasonic V-log
- RED Log3G10 Wide Gamut
- Canon Log 2
- Canon Log 3
- Output Dynamic Range/Color Gamut
- SDR BT.709 100 Nits
- PQ BT.2020 1000 Nits
- Hybrid Log Gamma BT.2100
- Sony S-Gamut3/S-Log3
- HDR Conversions
- HDR to HDR
- HDR to SDR
- SDR to HDR
- Colorimetry
- Supports BT.709 and BT.2020
|
| Mode of Operation | - Four Independent 2K, HD, or SD Video Processors
- One 4K, UltraHD, 2K, HD, or SD Video Processor
|
| Video Formats | - (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (UltraHD) 3840 x 2160PsF 23.98, 24, 25, 29.97, 30
- (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
- (HD) 1920 x 1080i 50, 59.94, 60
- (HD) 1280 x 720p 50, 59.94, 60
- (SD) 625i 50
- (SD) 525i 59.94
- YCbCr, 4:2:2, 10-bit
|
| Video Input Digital | - 4 x 3G-SDI inputs, 4 x BNC
- 4 x 3G-SDI inputs, 4 x Fiber or HD-BNC (optional SFP modules)
- SFP fiber modules, 3G-SDI, dual LC, single LC, or single SC, SMPTE-297
- SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
- SFP coax module, 12G/6G-SDI, dual HD-BNC
- 12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
- Single Link 12G/6G-SDI (with optional SFP module)
- Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
- Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
- Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
- Quad Link HD-SDI (4 x 1.5G)
- Dual Link HD-SDI (2 x 1.5G), SMPTE-372
- Single Link HD/SD
- Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD input pixel mapping
- 8 x 1 selector feeds video processor(s)
|
| Video Output Digital | - 4 X 3G-SDI outputs, 4 x BNC
- 4 x 3G-SDI outputs, 4 x fiber or HD-BNC (optional SFP modules)
- SFP fiber modules, 3G-SDI, Dual LC, Dual LC CWDM, Single LC, or Single SC, SMPTE-297
- SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
- SFP coax module, 12G/6G-SDI, dual HD-BNC
- 12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
- Single Link 12G/6G-SDI (with optional SFP module)
- Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
- Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
- Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
- Quad Link HD-SDI (4 x 1.5G)
- Dual Link HD-SDI (2 x 1.5G), SMPTE-372
- Single Link HD/SD
- Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD output pixel mapping
|
| Monitor Output Digital | - 1 x BNC, 1 x 3G-SDI output
- 3G-SDI/HD/SD, SMPTE-259/292/424, 10-bits
- 1 x HDMI, 1 x HD output
- 2K/HD/SD, HDMI v1.4a
- No HDR Infoframe generation
- Monitored Video Processor output (video and audio) is simultaneously output on both connectors
- 4K/UltraHD down-converted to 2K/HD
- Crop control on HDMI output
|
| Video Processing | - Motion adaptive deinterlacer
- Proc amp controls
- Color corrector
- Legalizer
- Frame rate conversion/film cadence removal/insertion (3:2, 1:2, 2:1, 2:3)
- Adjustable delay 0-6 frames with H and V timing controls in lines and pixels
- Closed Captioning conversion (CEA-608/CEA-708)
- AFD input detection, down-convert control, and output pass through or overwrite
- Freeze (manual or on input signal loss) to black or last good frame
- Matte generator for background fill
- Video test generator
- Nominal video delay HD/SD, 2 frames (LFR), 4 frames (HFR)
|
| Format Conversion | Convert any supported input format to any supported output format, within the same frame rate family. These three families are:- 59.94, 29.97, 23.98
- 50, 25
- 60, 30, 24
|
| Scaling | Supported in 2K/HD/SD formats- Zoom in and out
- Reposition
- Region of Interest (ROI)
|
| Up-Conversion | - Hardware 10-bit
- Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
- Zoom Letterbox: results in image zoomed to fill fullscreen
- Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting will introduce a small aspect ratio change
|
| Down-Conversion | - Hardware 10-bit
- Anamorphic: fullscreen
- Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
- Crop: image is cropped to fit video output format
|
| Aspect Ratio Conversion for SD to SD | - Letterbox: Transforms SD anamorphic material to a letterboxed image
- H Crop: Produces a horizontally stretched effect on the image; transforms anamorphic SD to full frame
- SD Pillarbox: Produces an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
- V Crop: Transforms SD letterbox material to an anamorphic image
|
| Audio Input Digital | - 48 kHz sample rate
- 8 x SDI embedded inputs (16-Channels each)
- 128-Channels, 24-bit (20-bit SD), SMPTE-272/299
- 8 x balanced AES inputs (16-Channels), 1 x DB-25
- 16-Channels, 24-bit, AES-3
- 2 x MADI inputs, 1 BNC, 1 x ST Fiber
- 128-Channels, 24-bit, AES-10
|
| Audio Output Digital | - 48 kHz sample rate
- 1 x SDI embedded output per Video Processor (16-Channels each)
- 16-Channels (in single Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
- 64-Channels (in four Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
- 8 x balanced AES outputs (16-Channels), 1 x DB-25
- 16-Channels, 24-bit, AES-3
- 2 x MADI outputs, 1 BNC, 1 x ST Fiber
- 128-Channels, 24-bit, AES-10
|
| Audio Processing | - 277 x 208 mono audio matrix, route 1 to 1, 1 to many
- Inputs: 128 embedded, 16 AES, 128 MADI, 2 stereo mixdowns, 3 tone generator
- Outputs (Four Channel mode): 16 AES, 128 MADI, 64 embedded
- Outputs (Single Channel mode): 16 AES, 128 MADI, 16 embedded
- Input adjustment controls for each channel
- Gain +18 to -18 dB in 0.5 dB steps
- Phase invert
- Input adjustment controls for each channel pair
- Delay -16ms to +1sec in 20.8 us steps
- Two independent 5.1 or 7.1 to stereo mixdown processors with gain adjust
- High quality Sample Rate Conversion supported on all audio inputs
- SRC bypass for non-PCM audio (e.g. Dolby E, AC-3, etc)
- Audio tone generator (mute, 400 Hz, 1 kHz)
|
| Reference Input | External, 2 x BNC- Looping, nonterminating
- Blackburst or tri-level sync
|
| Genlock | - Lock to External Reference
- Lock to SDI input 1 thru 8
- Free run based on Temperature Compensated Crystal Oscillator
|
| Network Interface | - 1 x RJ-45, 10/100/1000 Ethernet
- Embedded web server for remote control
- SNM
|
| User Interface | - Display
- Keypad with status LEDs
- Two rotary/push knobs
- Comprehensive alarm indicators
|
| Presets | Each mode supports 40 Presets |
| GPI | - 1 x 25-pin D-Connector
- Four optically isolated GPI inputs
- Four optically isolated GPO outputs
|
| Size (w x d x h) | 7.9 lb (3.6 kg) |
| Power | 100-240 VAC 50/60 Hz (Dual, redundant power supplies), 55W typical; 70W max. |
| Environment | - Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
- Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)
|
