AJA 4K2HD 4K/UHD to HD-SDI and HDMI Downconverter
• Analog zu HD/SD-SDI Konverter
• 4K (4096×2160) and UltraHD (3840×2160) Eingangsformat
• Downconversion auf HD
• HD-SDI und HDMI Ausgang gleichzeitig aktiv
• Unterstützt auch 50/60 fps als Eingangsformat
• Konfigurierbar über DIP Schalter
• Update und Konfiguration auch über USB
• 5 Jahre Garantie
AJA’s 4K2HD downconverts professional SDI 4K/UHD signals to HD resolution using AJA’s high-quality scaling for cost-effective monitoring and conversion. 4K2HD’s HD-SDI and HDMI outputs are both live all the time, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast. 4K2HD outputs SDI and HDMI simultaneously. 4K2HD supports high frame rate (HFR) 4K inputs at 50 and 60fps and converts the HD output to 25 and 30fps for accurate viewing. 4K2HD’s configuration options can extract an HD resolution image from the 4K input to provide a one-to-one pixel image for 4K focus checks on HD displays. Configuration can be set remotely via AJA MiniConfig software control over USB.
Real time downconversion
4K2HD uses real time processing and AJA’s high-quality scaling algorithms to downconvert professional 4K or UHD signals using 4 × SDI connections to HD resolution, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
Simultaneous HD-SDI and HDMI outputs
4K2HD’s HD-SDI and HDMI outputs are live all the time, allowing use of both professional SDI monitors as well as low-cost HDMI monitors simultaneously. No matter what monitors you have on hand, 4K2HD can use them for on the spot 4K viewing.
High frame rate support
Many 4K productions are opting for higher frame rates of 50 and 60fps. 4K2HD supports high frame rate (HFR) 4K inputs and converts the HD output to a matching frame rate for accurate viewing so what you shoot is what you see.
Center-cut extraction
4K2HD can be configured to extract an HD resolution center cut from the 4K input. This provides a one-to-one pixel image that can be used to check focus on 4K shoots without the need for a full 4K monitor.
Configure via USB and MiniConfig
AJA’s free MiniConfig software can be used with any USB-enabled AJA Mini-Converter and provides an easy-to-use graphical interface with detailed information about input and output formats as well as all configuration parameters.
Features
• 4K (4096×2160) and UltraHD (3840×2160) support
• Downconversion for supporting 4K on HD-SDI and HDMI devices
• Simultaneous HD-SDI and HDMI output
• Aspect ratio conversion from full 4K to HD
• Supports 4K/UHD 50/60fps high-framerate input formats
• Configurable via AJA MiniConfig software for Mac and PC
• Uses 5-20VDC power (DWP-U-R1 universal power supply included)
• 5-year warranty
Technical Specifications
| Input Formats | |
| 4K Inputs supported: | 4 x 1.5GHz SDI: |
| |
| 2 x dual-stream 3GHz SDI (level B): | |
| |
| 4 x 3GHz SDI: | |
| |
| HD Inputs supported (4:2:2 if Single Link or 4:4:4 if Dual Link) |
|
| SD Inputs Supported: |
|
| Video Inputs | |
| 3G, HD, and SD-SDI (auto-selected), 4x BNC | |
| Video Output | |
| 3G, HD, and SD-SDI, 1x BNC | |
| HDMI v1.4, 30/36 bits per pixel, RGB or YUV | |
| HDMI Standard Type A connector | |
| Audio Inputs | |
| SDI embedded audio, 24-bit, 8-channel | |
| Audio Outputs | |
| SDI embedded audio, 24-bit, 8-channel | |
| HDMI embedded audio, 24-bit, 8-channel | |
| Power | |
| +5VDC Regulated, 3 Watts, Power Supply Required (included with purchase) | |
| Size | |
| 5.76” x 4.02” x 0.90” (146 × 102 × 23 mm) | |
Die Ware ist
original verpackt und wird mit Rechnung und ausgewiesener
Mehrwertsteuer versendet. Diese Hardware ist Umtausch- und
Rückgaberecht ausgeschlossen.
